|
| |
|
| |
| |
|
MBS-18 |
| |
MBS-22 |
| |
MBS-26 |
| |
MBS-28 |
|
| |
| |
Heavy Duty Wood Cutting Band Saw |
|
| |
| |
Check These Outstanding Features： |
| |
- Frame：Rugged sheet steel construction, braced for maximum rigidity.
- Table：Precision ground cast iron, rib reinforced. Rear table support may be leveling adjusted. Fixed table without tilting.
- Blade Guards：The blade is completely guarded, only the operating portion is exposed for maximum operator safety. Blade guard can be swung out when not in ues.
- Blade Guides：Top and bottom blade guides are ball bearing. Top guide with ball bearing backup supported.
- Wheels：Made of cast iron, dynamically balanced for smooth cutting, and fitted with rubber tire as standard equipment. Wheels mounted in precision ball bearings.
- Exhaust Chute：4" deameter outlet, supplied as standard equiment.
- Wheel Cleaning Brush： Provide continuous cleaning action that greatly lengthens tire life.
|
|
| |
| |
 |
|
 |
| |
Micro Adjust Rip Fence
Fence May be vertically adjusted provideng bigger support especially for cutting higher stock. It can be swing away when not in use. Fence adjustment is accomplished by means of micro adjustment wheel. Fence alignment if necessary is made by turning a hand knob. |
|
Blade Tension And Tracking
A Counter-balance weight applies proper tension on the blade, together with the blade tension adjustment hand wheel offering the best blade tension. Tracking handwheel incorporate thread ajustment for accurate, easy blade tracking. |
|
| |
| |
Standard Equipment |
| |
- 3/4" band Saw blade.
- Dust Chute (4" dia.)
- Micro adjust rip fence.
- Wheel covered with rubber tire.
- Ball bearing blade guides.
- Ball bearing backup support.
- Wheel cleaning brush.
- Motor with magnetic switch.
|
| |
|
| |
Optional Accessories |
| |
- Band saw blade other than standard furnish.
- Circle cutting attachment.
- Automatic feed attachment.
- 1/2 to 3/4" blade weider with grinder.
- Motor HP in place of standard furnish.
|
|
| |
Specifications：
Motor |
MBS-18 |
MBS-22 |
MBS-26 |
MBS-28 |
| Blade to column |
15-3/4"(400mm) |
18-1/2"(470mm) |
23-5/8"(600mm) |
24-3/8"(620mm) |
| Maximum work thickness |
9-3/4"
(250mm) |
11-3/8"(290mm) |
15-3/4"(400mm) |
17-3/4" |
| Table size (L×W) |
19-5/8"×16-1/8" |
22-3/4"×17" |
28"×23-5/8" |
28"×23-5/8" |
| |
(500×410mm) |
(580×430mm) |
(710×600mm) |
(710×600mm) |
| Table in front of blade |
175mm |
195mm |
240mm |
240mm |
| Table tilt |
not available |
not available |
not available |
not available |
| Table height from floor |
20" |
23" |
32-1/2" |
32-1/2" |
| Wheel diameter |
18"(457mm) |
22"(559mm) |
26"(660mm) |
28"(711mm) |
| Wheel width |
1-1/2"(38mm) |
2"(50.8mm) |
2"(50.8mm) |
3"(76.2mm) |
| Wheel speed |
560RPM |
560RPM |
700RPM |
650RPM |
| Blade length |
125"(3170mm) |
135"(3420mm) |
177"(4500mm) |
185"(4700mm) |
| Bladw width |
1/2",3/4",1" |
1/2",3/4",1",
1 1/2" |
1/2", 3/4", 1",
1 1/2", 2" |
1/2", 3/4", 1", 1 1/2", 2", 3" |
| Motor HP |
1 HP |
1 HP |
2 HP
(3 HP, 5 HP OPT.) |
3 HP (5HP, 7-1/2 HP OPT.) |
| Net weight |
180kgs |
210kgs |
320kgs |
450kgs |
| Gross weight |
250kgs |
280kgs |
420kgs |
550kgs |
| Packing diamensions (L×W×H) |
32"×27"×67" |
36"×28"×71" |
860×1160×2160mm |
860×1160×2160mm |
|
All specifications, dimensions, and design characteristics shown in this
catalogue are subject to change without notice. |
| |
| |
| |
|
|
